Aktuell Aluminium diving cylinder 5.7 litres (40cuf), 207 bar complete Manifold valve G5/8″ LA Left

Aluminum Diving Cylinder 5.7 Liter 40cft, 207 bar complete with manifold Valve G5/8″ LA Left

The 5.7-liter aluminum diving cylinder is primarily used as a stage cylinder in technical diving. Due to its size, it can also be used well with rebreathers / closed-circuit devices for both diluent gas / flush gas and oxygen. The delivery includes a compressed air valve according to DIN G5/8″ or M26x2 Nitrox valve. The breathing gas supply is sufficient for approximately 30 minutes of safety stop, decompression stop, or as a cylinder for the rescue kit with 100% oxygen.

Technical of Aluminum Diving Cylinder

• Aluminum diving cylinder with a bottle volume of 5.7 liters (40Cuf)
• Pressure stage: 207bar operating pressure and 311bar test pressure
• Bottle neck thread: M25x2 (DIN EN 144-1 / DIN EN ISO 15245-1)
• Valve: Manifold valve G5/8″ LA Left according to DIN EN 144 / DIN EN ISO 12209
• Bottle neck thread sealed with O-ring 25×3.55mm
• Diameter of the bottle: 133mm
• Length of the bottle (without valve): approx. 645mm (batch-dependent deviations up to 10% possible)
• Weight of the bottle without valve: approx. 6.95 (weight varies depending on the batch and can deviate up to 10%)
• Color: White painted (depending on the supplier)
• Bottle bottom: Flat
• Permissible gases: Breathing air, Nitrox, Oxygen, Compressed air, Argon (must be explicitly marked by the operator!)
• Design type examination according to EU Directive 2014/68/EU (Module B + C2)
• Bottle manufactured according to EN ISO 7866
• Certification: CE
• Commissioning inspection (TÜV) included with inspection date +/- 6 months
• TÜV protocol and declaration of conformity are included with the bottle or provided electronically
• „Product appearance may vary“

The delivery includes an aluminum diving cylinder with 5.7 liters at 207bar in the color white, declaration of conformity, commissioning inspection, and Manifold valve G5/8″ LA Left.