Angebot Finimeter Nitrox 300bar with 18cm high pressure hose

Finimeter for Nitrox with 18cm long high pressure hose

Finimeter for Nit rox 300 bar with 18 cm long high-pressure hose, is the instrument for the technical diver ( Tec Diver ) for stage diving cylinders. The Fini is specially designed for Nitrox and oxygen, but can also be used as normal for compressed air, Trimix 200 bar and 300 bar. The stage cylinders are worn on the side so that the pressure gauge can also be easily read with the short hose. The usual 80 cm long high-pressure hose is more of a hindrance when sidemount diving. The connection piece on the side of the first stage has a throttle hole which only allows approx. 40 l/min of breathing gas to flow out if the high-pressure hose is defective. The hose connection is 7/16″ UNF, the standard connection thread. A simple Fini is of course no substitute for a console with depth gauge and compass. The diver should usefully supplement these indispensable instruments, especially when sidemount diving. You can find more instruments, dive computers and dive watches in our shop.

Technical data:

• Finimeter Nitrox
• Diameter 50mm (finimeter without protective cover)
• Diameter 54mm (incl. protective cover)
• Thickness 21.4mm (incl. protective cap)
• Accuracy class 2.5
• Display up to 300bar
• colour-coded zones (warning colours)
• Hardened, scratch-resistant mineral glass, 5mm thick
• Brass housing
• High pressure hose length 18cm
• Connection thread 7/16″ UNF
• particularly suitable for stage bottles
• with protective cover and kink protection – picture similar
• Flow limitation in the hose connection, only low breathing gas loss if the high-pressure hose is defective
• CE 0474