Begrenztes Angebot Aluminum scuba tank 11 liter 200 bar complete with Nitrox monovalve M26x2 left

Aluminum Diving Cylinder 11 Liter 200bar with Nitrox monovalve M26x2 left

Aluminum diving cylinders offer a significant advantage over steel diving cylinders: They are usually neutral or have minimal buoyancy in the water. This means that divers do not need to adjust their buoyancy when carrying an additional aluminum diving cylinder. The amount of lead required also remains unchanged. Thanks to their neutral behavior, aluminum cylinders are barely noticeable as stage cylinders and do not pose an additional burden during the dive. Nevertheless, it is important for technical divers to regularly practice handling stage cylinders to be able to act safely and efficiently in an emergency.

Technical of Aluminum Diving Cylinder

• Aluminum diving cylinder with a volume of 11 liters
• Pressure level: 200bar working pressure and 300bar test pressure
• Bottle neck thread: M25x2 (DIN EN 144-1 / DIN EN ISO 15245-1)
• Valve: Nitrox monovalve M26x2 left according to DIN EN 144 / DIN EN ISO 12209
• Bottle neck thread sealed with O-ring 25×3.55mm
• Diameter of the bottle: 184mm
• Length of the bottle (without valve): approx. 665mm (batch-dependent deviations up to 10% possible)
• Weight of the bottle without valve: approx. 13.8kg (weight varies depending on the batch and can deviate up to 10%)
• Color: Aluminum Polished (Unpainted)
• Bottle bottom: Flat
• Permissible gases: Breathing air, Nitrox, Oxygen, Compressed air, Argon (must be explicitly marked by the operator!)
• Bottle manufactured according to EN ISO 9809-1
• Commissioning inspection (TÜV) included with inspection date +/- 6 months
• TÜV protocol and declaration of conformity are included with the bottle or provided electronically
• „Product appearance may vary“

The scope of delivery includes an aluminum diving cylinder with 11 liters at 200bar in the color aluminum polished, declaration of conformity, commissioning inspection, and Nitrox monovalve M26x2 left.