Diving cylinder 1 litre 300 bar complete with S-valve Nitrox M26x2 Neu Im Sortiment

1 Litre 300 Bar Diving Cylinder Complete with S-Valve Nitrox M26x2

Small diving cylinders are increasingly used in diving for the transport of gases (argon, helium, oxygen). This 1 litre steel cylinder with a 300 bar working pressure can be used for all common gases and gas mixtures. Due to the higher pressure, a larger quantity of gas is available at the same volume, making this cylinder suitable not only as an argon storage cylinder for filling the drysuit, but also as an oxygen cylinder for initial care after a diving accident, or as a bailout/stage cylinder in technical diving. In a rebreather, this steel cylinder can be used as an oxygen or diluent gas cylinder. The S-valve is a standard mono valve with a single outlet, based on the design known from industrial applications. The shut-off is located at the top of the valve, with the outlet positioned to the side.

Technical Data of the 1 Litre 300 Bar Compressed Gas Cylinder

• Steel cylinder with a cylinder volume of: 1 litre
• Pressure rating: 300 bar working pressure and 450 bar test pressure
• Cylinder neck thread: M18x1.5
• Valve: S-valve Nitrox M26x2
• Outlet thread/thread connection: M26x2 per DIN EN 144-3
• Cylinder neck thread sealed with O-ring 18×2.7mm
• Cylinder diameter: 83mm
• Cylinder length (without valve): approx. 275mm (batch-dependent deviations of up to 10% possible)
• Weight of the diving cylinder without valve: approx. 1.7kg (weight varies by batch and may deviate by up to 10%)
• Paint colour: White RAL 9010
• Cylinder base: Convex
• Steel cylinders stamped Breathing Apparatus
• Approved gases: breathing air, Nitrox, oxygen, compressed air, pressurized air, argon (must be expressly labelled by the operator)
• Initial commissioning inspection included, with inspection date (tolerance) +/- 6 months
• Test protocol and declaration of conformity are included with the cylinder or provided electronically

Scope of delivery:

Included in the scope of delivery is one steel cylinder/diving cylinder, 1 litre, 300 bar, in white, declaration of conformity, initial commissioning inspection, and S-valve Nitrox M26x2.