Angebot!

Expressversand LED Akkutanklampe 40 W, 2 Piezo Schalter, 27,2 Ah Akku , nicht trennbares Kabel am Lampenkopf, 1x E/O Cord 65cm für Heizung

Ursprünglicher Preis war: 1.107,00 €Aktueller Preis ist: 464,94 €.

Sichere Zahlung Karte, PayPal und geschützter Checkout
Kostenloser Versand ab 109,00 € Schnelle Lieferung in ganz Deutschland
Schneller Support Hilfe bei Bestellungen und Versand
Artikelnummer: SK7BRI00J3C Kategorie:

PERCH LH40 (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens are designed with fixed-focus light head, additional on/off switch and heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah. Used water-tight piezo push-button switch.

All the electronics is now located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.
Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.
There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.
Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positionsconnected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)

The battery indicator shows the level of the battery charge.
Labelled „LED indicator“, The LED indicator is located on the right
side of the head.
The LED light indicates the battery performance status and provides
information on the current battery level.
When the battery is switched on, the indicator lights in one of the
following modes:
green, continuous: 100 %15 % of charge capacity
red, continuous: 15 % – 5 %
red, intermittent: 5%0,1 %

TECHNICAL SPECIFICATIONS:

– fixed focus 12°
– colour temperature: 6500°K
– luminance: 3960lm
– complete electronics in headlamp
– completely sealed Li-Ion battery pack
– over-charge, over-discharge, over-drain and short circuits protection
– banana connectors
battery indicator
piezo push-button switch
– standard cable length 1,0m* long (or according to customer’s order)
– heating cable length: 65cm ( or according to customers order max. 1m)
– head length: 10,5cm
– material: Delrin
– max. operating depth: 150m
– automatic charger for Li-Ion packs

* option: E/O cord 1,0m (65cm/35cm) long (or according to customer’s order)

Model

Capacity – Ah

Operating timemin

Canister – L / Ø – cm

Weight/ Weight in water – kg

Charging timeh

PERCH LH 4021

20,8

325

30 / 8

3,0 / 0,8

9

PERCH LH 4021 E/O

20,8

325

30 / 8

3,0 / 0,8

9

PERCH LH 4027

27,2

390

30 / 8

3,1 / 0,9

11

PERCH LH 4027 E/O

27,2

390

30 / 8

3,1 / 0,9

11

PERCH LH 4041

40,8

570

30,5 / 9

3,9 / 1

20

PERCH LH 4041 E/O

40,8 570 30,5 / 9 3,9 / 1 20