Manifold compressed air G5/8” 232bar 185mm for scuba tanks 140/171mm M25x2 double scuba tank valve Nur Heute

Compressed air valve bridge for double scuba diving equipment with cylinder diameter 171mm

Valves for scuba tanks are classified according to various criteria. There is the cylinder neck thread of the scuba tank, the pressure rating 200 bar or 300 bar. Then there is the connection thread for the first stage of the regulator or pressure reducer. It is irrelevant whether the cylinders are steel or aluminum cylinders. In general, the compressed air connection on the valve is also known as the DIN connection. The valve combination offered here is intended for diving equipment with two diving cylinders as a twin pack. With a valve center to valve center distance of 185mm, it is suitable for scuba cylinders up to 171mm diameter, e.g. the 12 liter long compressed air cylinders. With an appropriate second outlet, the cylinders can also be dived individually with a double valve.

Technical data valve bridge
-Valve bridge for diving cylinders with a diameter of 171mm, e.g. 8, 10, 11 and 12 liters
-Pressure stage 230 bar
-Valve bridge middle section can be shut off
-Center section of the valve combination double O-ring sealed
-Handwheels black
-Automatic compressed air connection G5/8″ to DIN
-for cylinders with M25x2 cylinder neck thread to DIN EN-144
-Blind screws are also available so that the cylinders can also be used individually.
Manufacturer article number BE-0740/50R or BE-0740/50L
The valves are double galvanized, nickel-plated and chrome-plated