Markenware Aluminum scuba tank 11.1Liter 80cft complete with monovalve and rigging kit

Aluminum diving tank 11,1 liter (80cft) with monovalve + riggingkit

The aluminum scuba tank is offered here by us complete with scuba tank valve and rigging kit. The rigging kit is made of 25mm wide webbing and has two carabiners, which have a large ring for attachment. This large ring allows even with thick gloves to put through two fingers to put on and take off the aluminum diving bottle as a stage bottle or sidemount bottle. So on delivery everything is completely ready for diving. The rigging kit has the advantage that it is attached to the lower end with a tension belt, which is attached to the buoyancy jacket with a quick-release buckle. If necessary, the rig can thus be changed in a few seconds to another diving bottle.

Technical data aluminum diving bottle
-Air cylinder from Catalina
-207 bar cylinder operating pressure
-Bottle neck thread M25x2 according to EN 144
-type test according to EU-guidelines
-Aluminum natural ground
-monovalve not expandable compressed air
-Rigging kit made of webbing with two large snap hooks
-commissioning test (TÜV) included with test date +/- 6 months
-TÜV protocol as well as declaration of conformity is enclosed with the cylinder or will be provided electronically
-Product may differ in appearance from picture, shown with monovalve

Options for diving cylinder valves
-expandable mono diving cylinder valve
-Double valve compressed air G 5/8″
-Nitroxmonovalve M26x2
-Nitroxdouble valve M26x2
-oxygen valve G 3/4″