Preis Gesenkt Aluminum diving cylinder 11.1 liters 80cft complete with SH valve G5/8″

Aluminum Diving Cylinder 11.1 Liter 80cft with SH Valve G5/8″

Aluminum diving cylinders offer a significant advantage over steel diving cylinders: they are usually neutral in the water or have slight buoyancy. This means that the diver does not need to adjust their buoyancy when carrying an additional aluminum diving cylinder. The amount of lead required also remains unchanged. Thanks to their neutral behavior, aluminum cylinders are hardly noticeable as stage cylinders and do not pose any additional burden during the dive. Nevertheless, it is important for technical divers to regularly practice handling stage cylinders to be able to act safely and efficiently in an emergency.

Technical of Aluminum Diving Cylinder

• Aluminum diving cylinder with a bottle volume of 11.1 liters (80Cuf)
• Pressure level: 207bar operating pressure and 311bar test pressure
• Bottle neck thread: M25x2 (DIN EN 144-1 / DIN EN ISO 15245-1)
• Valve: SH Valve G5/8″ according to DIN EN 144 / DIN EN ISO 12209
• Bottle neck thread sealed with O-ring 25×3.55mm
• Diameter of the bottle: 183mm
• Length of the bottle (without valve): approx. 760mm (batch-dependent deviations up to 10% possible)
• Weight of the bottle without valve: approx. 14.35kg (weight varies depending on the batch and can deviate up to 10%)
• Color: Natural Aluminum (Unpainted) (Depending on the supplier)
• Bottle bottom: Flat
• Permissible gases: Breathing air, Nitrox, Oxygen, Compressed air, Argon (must be explicitly marked by the operator!)
• Design type examination according to EU Directive 2014/68/EU (Module B + C2)
• Bottle manufactured according to EN ISO 9809-1
• Certification: CE
• Commissioning inspection (TÜV) included with inspection date +/- 6 months
• TÜV protocol and declaration of conformity are included with the bottle or provided electronically
• „Product may vary in appearance“

The delivery includes an aluminum diving cylinder with 11.1 liters at 207bar in the color Natural Aluminum, declaration of conformity, commissioning inspection, and SH Valve G5/8″