Revision kit for diving cylinder valve / monovalve compressed air HTD (Barell) M25x2 Abverkauf

Revision kit for diving cylinder valves M25x2 bottleneck thread

Diving cylinder valves are subject to a high degree of wear, especially when used in salt water. In order not to always have to replace the complete valve, the wear parts and O-rings can be renewed. Cleaning the valve body in an ultrasonic bath makes the diving cylinder valve as good as new.

Components of the revision kit / spare parts kit
-1x O-ring for bottle valves Bottle neck thread according to EN 144 – standard
-1x Teflon washer for top spindle spare part number -10-
-1x Teflon support ring on top spindle Spare part number -11-
-1x O-ring top spindle -16-
-1x top spindle for immersion bottle valve, spare part number -3-
-1x lower spindle for diving cylinder valve with R1/4″ thread, spare part number -13-