Sichere Zahlung Steel cylinder / diving cylinder 3 liters 232 bar 100mm M25x2 without valve white

Compressed Gas Cylinder, 3 Liters 232bar, Steel Cylinder without Attachments

The 3-liter compressed gas cylinder can be used just like the 2-liter diving cylinder. It is intended for sport divers and technical divers who want to extend their dives a bit. This cylinder is sufficient as an argon cylinder for filling the dry suit for dives of about 3 – 4 hours. When used in a rebreather, it extends the usage time of the rebreather by about 30% compared to a 2-liter cylinder. The 3-liter steel cylinder is also adequate as an oxygen cylinder in a rescue kit. The 3 liters of oxygen are sufficient for about 30 minutes of ventilation for an accident victim at 20 liters/min. respiratory minute volume.

Technical Data:

• Cylinder volume: 3 liters
• Pressure level: 232bar operating pressure and 348bar test pressure
• Cylinder neck thread: M25x2 (DIN EN ISO 15245-1)
• Cylinder neck thread sealed with O-ring 25×3.55mm
• Diameter: 100mm
• Length: approx. 500mm (batch-dependent deviations up to 10% possible)
• Weight: approx. 4.3kg (weight varies depending on the batch and can deviate up to 10%)
• Coating color: Powder-coated in white RAL 9010
• Cylinder bottom: convex
• Wall thickness: approx. 2.5mm (batch-dependent)
• Permissible gases: breathing air, nitrox, oxygen, compressed air, pressurized air, argon (must be explicitly marked by the operator!)
• Manufactured according to EN ISO 9809-1

The delivery includes a steel cylinder with 3 liters at 232bar in the color white and a declaration of conformity.